Vials · FDA label

Zepbound vial guide

A Zepbound vial holds one strength of tirzepatide, from 2.5 to 15 mg. The single-dose vial is 0.5 mL, injected whole (50 units on a U-100 scale); the multi-dose vial is 2.4 mL holding four 0.6 mL doses. Both are drawn with a new 1 mL syringe each time.

Tirzepatide Calculator editorial teamUpdated 7 sources

One strength per vialEvery Zepbound vial holds one strength. A 5 mg single-dose vial is one 5 mg dose; a 5 mg multi-dose vial is four 5 mg doses. Neither is meant for measuring a different dose out of it.[1]

Zepbound vial strengths: single-dose vials

Each single-dose vial contains 0.5 mL of solution with no preservative. The strength on the vial is the dose in that 0.5 mL.[1]

Zepbound single-dose vials
StrengthVolumeConcentrationFull vial (U-100 scale)Vial first offered
2.5 mg0.5 mL5 mg/mL50 unitsAugust 27, 2024[3]
5 mg0.5 mL10 mg/mL50 unitsAugust 27, 2024[3]
7.5 mg0.5 mL15 mg/mL50 unitsFebruary 25, 2025[4]
10 mg0.5 mL20 mg/mL50 unitsFebruary 25, 2025[4]
12.5 mg0.5 mL25 mg/mL50 unitsAugust 2025[5]
15 mg0.5 mL30 mg/mL50 unitsAugust 2025[5]

Single-dose vials come in cartons of 1 or 4.[1] The label says: “Throw away all opened vials after use, even if there is medicine left in the vial.”[1]

Multi-dose vials (approved January 2026)

On January 7, 2026 the FDA approved a multi-dose Zepbound vial.[6] It holds 2.4 mL: four weekly doses of 0.6 mL each, with benzyl alcohol and phenol as preservatives.[1]

Zepbound multi-dose vials
Dose per injectionTotal in vialConcentrationOne dose (U-100 scale)
2.5 mg / 0.6 mL10 mg / 2.4 mL4.17 mg/mL60 units
5 mg / 0.6 mL20 mg / 2.4 mL8.33 mg/mL60 units
7.5 mg / 0.6 mL30 mg / 2.4 mL12.5 mg/mL60 units
10 mg / 0.6 mL40 mg / 2.4 mL16.67 mg/mL60 units
12.5 mg / 0.6 mL50 mg / 2.4 mL20.83 mg/mL60 units
15 mg / 0.6 mL60 mg / 2.4 mL25 mg/mL60 units

As of November 13, 2026, LillyDirect lists three Zepbound formats (KwikPen, single-dose vial and single-dose pen) and does not list the multi-dose vial.[7]

How to inject a Zepbound vial: the label instructions

The prescribing information says to use “a 1 mL syringe capable of measuring a 0.5 mL or 0.6 mL dose” and to “always use a new syringe and needle for each injection.” The syringe and needle are not included.[1] The Instructions for Use measure by the millilitre lines on the syringe, not by units:[1]

  1. Draw air into the syringe to the 0.5 mL line (0.6 mL for a multi-dose vial) and push it into the vial.
  2. Turn the vial upside down and pull the plunger past the line.
  3. Slowly push the plunger back up until its tip reaches the 0.5 mL line (0.6 mL for a multi-dose vial).
  4. Inject under the skin of the abdomen or thigh, or the back of the upper arm if someone else gives it, and hold the needle in for at least 5 seconds.

This is a summary. The Instructions for Use that come with the vials have drawings of each step and are the version to follow.[1] Other label points: “Do not mix ZEPBOUND with any other medicine,” rotate injection sites, and do not use the solution if it is cloudy, discolored or has particles in it.[1]

Storage

Zepbound vials are kept in the fridge; a single-dose vial may spend up to 21 days at room temperature and an unopened multi-dose vial up to 30.[1]

Storage from the Zepbound label
SituationSingle-dose vialMulti-dose vial
Normal storageRefrigerate at 2–8 °C (36–46 °F)Refrigerate at 2–8 °C (36–46 °F)
Without refrigerationUp to 30 °C (86 °F) for a total of 21 daysUnopened: up to 30 °C, throw away after 30 days
After first useSingle use: discard the vialFridge or up to 30 °C; discard after 30 days at room temperature, 30 days after first use, or 4 doses, whichever comes first
AlwaysDo not freeze; keep in the carton to protect from lightDo not freeze; keep in the carton to protect from light

An April 2026 label update supports moving single-dose vials and pens between the fridge and room temperature within the 21-day limit.[2]

Zepbound vial price

Single-dose vials are sold only through Lilly's self-pay pharmacy, LillyDirect; insurance is not used for them.[7] Prices for a 4-vial fill, checked November 13, 2026:[7]

Single-dose vials, self-pay, per 4 vials
StrengthPriceRegular price*Per weekly dose
2.5 mg$299$299$74.75
5 mg$399$399$99.75
7.5 mg$449$499$112.25
10 mg$449$699$112.25
12.5 mg$449$699$112.25
15 mg$449$699$112.25

* The lower price for 7.5 mg and up applies on the first fill and on refills within 45 days of the previous delivery; otherwise the regular price applies.[7] Prices change: confirm before ordering. More on the cost page.

Frequently asked questions

How many units is a Zepbound vial?

A single-dose vial holds 0.5 mL, which is 50 units on a U-100 insulin syringe scale, whatever the strength. One dose from a multi-dose vial is 0.6 mL, or 60 units. The label itself measures in mL.

Can you get more than one dose out of a single-dose Zepbound vial?

No. The label says to inject the full contents and throw the vial away, even if medicine is left in it.[1]

How do you inject a Zepbound vial?

Draw the dose with a new 1 mL syringe to the 0.5 mL line (0.6 mL for a multi-dose vial), inject under the skin of the abdomen or thigh (or upper arm, by someone else), and hold the needle in for at least 5 seconds. Follow the Instructions for Use.[1]

What syringe do I use for a Zepbound vial?

The label says “a 1 mL syringe capable of measuring a 0.5 mL or 0.6 mL dose”, new for each injection. It is bought separately.[1]

How long can a Zepbound vial stay out of the fridge?

A single-dose vial can be kept at up to 30 °C (86 °F) for a total of 21 days. An unopened multi-dose vial can be kept at up to 30 °C for 30 days.[1]

Sources

  1. Zepbound (tirzepatide) injection: prescribing information, Medication Guide and Instructions for Use · Eli Lilly and Company, via NLM DailyMed, label effective August 28, 2026
  2. Drugs@FDA: NDA 217806 (Zepbound) approval history and supplement letters · U.S. Food and Drug Administration, accessed November 13, 2026
  3. Lilly releases Zepbound single-dose vials, expanding supply and access · Eli Lilly and Company press release, August 27, 2024
  4. Lilly launches additional Zepbound vial doses and offers new savings for self-pay patients · Eli Lilly and Company press release, February 25, 2025
  5. Lilly to offer all approved doses of Zepbound single-dose vials through LillyDirect · Eli Lilly and Company press release, June 16, 2025
  6. Zepbound supplement approval letter S-037 (multi-dose vial) · U.S. Food and Drug Administration, January 7, 2026
  7. Zepbound on LillyDirect: formats and self-pay prices · Eli Lilly and Company, accessed November 13, 2026